Fixing my faucet, a year and a half later

When we were remodeling our house, we had to pick everything, including the kitchen sink! My wife and I went shopping for a kitchen faucet months before it was ready to be installed so that we could get it ordered and get it out of the way. We wanted a detachable sprayer and wanted it in stainless steel. We went to our local Pacific Sales and looked at all the kitchen faucets (and there were a ton). The one feature we hated on just about all of them was that the detachable spray heads were made out of plastic while the rest of the faucet was made out of stainless steel (or at least some type of metal). The plastic would chip, change color or just not hold up based on past experience. Even though many consumer faucets carry a lifetime warranty, I didn't want to deal with that (been there, done that).

We stumbled across the Brizo Solna (made by Delta) and thought that the hidden spray head was great as the plastic for the spray head wouldn't been seen. We ordered it and then picked it up a few weeks later (or so). The plumber installed it when we were ready and that was that. A few days after it was installed (the plumber was still around doing something), I asked the plumber why the spray head wasn't flush and didn't retract well and he said it had to do with the weight on the hose and the position of the pipes. Oh well, I guessed I'd have to live with it even though it wasn't quite a clean look.

A few months ago, I discovered that if I pushed the spray head all the way up into the faucet it would stay. It seemed a little clunky, but it was better than what we had before. This evening, I noticed that the spray head was no longer staying, so I started pushing on a tab to see what would happen and discovered that the MagneDock® magnet was stuck to the spray head when it should have been in the faucet.

Now things were starting to make sense; the MagneDock® piece was never seated properly and I had to get it back in place. I took the neck of the faucet off and the spray head. I then started pushing the magnet back in place. I pushed it down with the handle of a pair of pliers and presto, it stuck. I tried the spray head and it clicked into place; I pulled it off and tried again. Holy cow, I had been living with this problem for 1.5 years and never even thought of investigating it.

So after I put everything back together, I tried again and just like magic, the spray head clicked back into place. Looking at the assembly instructions, it indicated that the magnet was part of the neck, but that it wasn't a separate piece. I almost feel like an idiot that I didn't figure this out for so long, but the good news is that I figured it out and as pleased as punch that I feel like I have a new faucet!

No longer feel safe in my own home

Today marks a kind of sad day for me; I no longer feel safe in my own home. The short term vacation rental next door has changed my whole sense of safety and security. The owner/operator has decided that money matters more than the neighborhood and rents it out to whoever will pay the asking price. This weekend it was a group of students on spring break. They have no respect for the neighborhood and have been loud. Last night we called the police and the noise quieted down; this morning, we saw them smoking pot in the backyard (they can see into our backyard and we can see into their backyard). Police responded and at least one of them had a medical marijuana card, so there was nothing the police could do. (Apparently police no longer deal with misdemeanor drug possession.)

As I was walking the dog, I got a frantic call from my wife that some guy named Rob was banging on our door demanding to come in. I turned around and hurried back. When I got home, I went inside and then came out again only to see "Rob" walking out from our side yard. I yelled at him and told him to get off our property. I saw him walk down the street the wrong way (not towards the rental) and instantly knew he was drunk (can you say public drunkenness?). I then walked down the street to see where he was going next. He went to my neighbor's house and then the next neighbor trying to get in. I walked back and stopped in front of my neighbor's house; I saw him again bang on my neighbor's door (who wasn't home) and Rob insisted that he was renting the place. I told him he wasn't and to get off the property. (I sent that neighbor a picture of Rob on his property.)

My wife was on hold with the police for 11 minutes and when she finally got through, the dispatcher wouldn't send officers because the guy was no longer on our property and was inside a residence.

The owners/operators talk about this being managed by "bad apples"; the problem is that some of the people turning to vacation rentals as mini-hotels (just the properties that are used exclusively for short term vacation rentals) are in it only for the money. If they weren't, they'd be renting out the properties on a long term basis.

While the city council's Smart Growth and Land Use Committee is bringing this up on April 22nd, I fear that anything they decide to do will be reactionary and allow this behavior to continue. If the police can't respond fast enough (they are already under staffed), how can these problems be witnessed and documented? It becomes a case of neighbor saying one thing and no one listening. (Video evidence doesn't appear to count in this case.)

Change needs to happen now; these mini-hotels have to go. If nothing is done about these, what are my options to keeping my sanity? Move? Where do I go? If I move, I kick the problem down the road to my nice neighbors. How many more days/nights will I have to put up with this? Will someone knock on my door at 3 am and scare the crap out of me? Will some drunk person vandalize my house? Every weekend I fear what will be coming next; this is a horrible way to live.

To all those that claim property rights and that people should be able to do what they want with their properties, live next to a mini-hotel for awhile and feel what it is like to have no idea if the renters will be respectful or you'll have to call the police.

(As a side note, I hate to call the police, but my options are limited. My neighbor only wants to do short term rentals and there is no way that he can (or will) vet everyone that stays. One person rents and brings 10 friends.)

Installing a Car Stereo

About 10 years ago, I bought a Parrot CK3100 to install in my 2003 Toyota Highlander as I wanted to be able to answer the phone while driving if my wife called me. I was unable to figure out how to install it, so I returned it. I think about a year later, I bought the car kit again and tried again.

This time, however, I was determined to install it. It turns out the tricky part of installing the car kit was the factory amplifier I had, so I decided to put in a marine speaker and put it under the center console. The install was still tricky, but I managed to get it working.

The car kit worked OK, but the audio quality was never great due to the location of the speaker as well as the type of speaker. It survived a number of phones from different manufacturers and worked decently with my iPhones. However, in the last year or so, I've found the connection less than stable and would fail to connect quite often. It was annoying, but I didn't think much of it.

Last week, I had a business trip where I had to drive to Orange County (I haven't driven for work in years). On the way up, I used Navigon for navigation; normally it routes the navigation audio through the car kit, but due to the connection issues, it didn't work well. So I turned up the volume and it continued to navigate. However, Navigon crashed and I didn't want to pull over to figure out where to exit. I used Siri to navigate to my destination and all was good (a bit hard to hear as the audio was coming out of the phone's speaker, but doable). On my way home from the trip, my wife was texting me about road conditions and since my car kit wasn't working, I had to put in a headset and used Siri to read the messages.

When I got back, I wanted to find a solution to this and started looking at new stereos (something I've never done in my life) and found an inexpensive Pioneer one. I've always heard good things about Crutchfield and their support. I ordered the unit along with all the install pieces. I spent the time waiting for the stereo to study the install instructions and they were as clear as mud. I am an engineer, so how hard could it be?

Since I had a factory amplifier, Crutchfield had a Scosche SLC-4 Line Output Converter as a recommended install accessory. Using the included wiring harness and line output converter, I wired everything up and thought it would be a piece of cake (I soldered all the connections, used shrink wrap tubing on the connections, and tightened the screws on the SLC-4.

The rest of the install was pretty easy and I was pleased with my work until I turned it on. There was static (not a hum) on the speakers and even a connection from my phone (to rule out the radio noise) didn't help. I checked all the connections and nothing helped. I studied the diagrams again and took a chance hooking all the ground wires together; the diagrams had the ground for the amp separate from the chassis ground so I had connected the ground for the Line Output Converter to the amplifier ground. What I didn't realize is that the amplifier needed to be grounded to the stereo. After this change, the stereo worked great!

There is a reason there are so many installers for car stereos; there are far too many combinations to have instructions for all of them. While the Crutchfield instructions were an OK start, they are definitely not for the novice. I was just lucky because I have a basic understanding of electronics as well as being determined.

I've learned a bit and am extremely pleased with my handy work. I'm also amazed at how inexpensive car stereos are and how much they do these days; my new stereo does everything my old one did (OK, it doesn't have a CD changer that I never used nor a tape deck that I didn't use either) and has all the pieces of a Bluetooth car kit.

Learning about Surround Sound

During our recent vacation, I happened to hear rear speakers on a 5.1 surround sound system and was intrigued by it. I'm not an audiophile nor do I have a home theater system. I do have a TV and a sound bar in our living room. So I decided to try out a Vizio 38 inch sound bar. Setting it up was quite easy and the wireless subwoofer/rear speakers fit perfectly in my living room. This post, however, isn't a review on this sound bar.

After hooking everything up, I only heard stereo sound and was confused as to why I didn't hear surround sound even though I read that Netflix (my test content) had 5.1 surround sound content. I read a bit about this and saw that there were settings in the Roku box to turn on Dolby Digital and DTS. The sound bar handles DTS and Dolby Digital, but not Dolby Digital+. I chose Dobly Digital+ and DTS only as it was close enough. Still no go; I started futzing with the TV as I had also read that my TV (a Vizio) did pass through of audio, so the Roku should pass the audio to the TV and then to the sound bar via the optical out.

My TV had PCM and Bitstream audio out. I had never heard of Bitstream, but the TV was set to PCM, so I chose Bitstream. I went back to Netflix on the Roku and magically I saw content have a 5.1 badge next to it! It was a miracle (OK, not quite). I played some content and it was pretty cool to hear the audio behind me as well as the sound through the subwoofer.

So, it appears that anyone that wants to have a home theater work properly or just have surround sound needs to learn a new language (audio encoding/encoding) as well as futz with all the settings. My guess is that there are only a small percentage of people with these systems that actually have them working properly.

(Another part of this puzzle was getting the TV shows we record to properly export them and preserve the audio encoding; EyeTV's export mechanism to MP4 converts audio to stereo even if the over-the-air format is 5.1. I did manage to figure this out, it it isn't for the faint of heart and required a lot of futzing.)